Silicone / Caulk Calculator
Tubes from joint dimensions
Silicone / Caulk
Tubes
0
※ Volume(ml) = width(mm) × depth(mm) × length(m). Standard tube is 300ml.
Details
⚠️ This calculator gives a reference estimate based on typical coverage rates and construction standards. Actual quantities vary with product, substrate, method and waste factor, so always verify with the product datasheet and site conditions. calcstool.com assumes no liability for material shortage, excess or loss based on these results.
FAQ
How many meters per tube?
Depends on joint size. A 10×10mm joint gives ~3m per 300ml tube. Bigger joints use more.
How is volume calculated?
Volume(ml) = width(mm) × depth(mm) × length(m).
What waste factor?
Usually about 10% for site loss.
Advertisement (AdSense)